Skip to content
English
Go to Aputure.com
  • There are no suggestions because the search field is empty.

[amaran Ray 60c & 120c] Display Condensation

Seeing condensation on your amaran Ray 60c or 120c display? This temporary cosmetic effect is normal on some early units – follow the steps below to safely clear it and review common FAQs.

Some early amaran Ray 60c and 120c units may show light condensation under the display during the first few uses. This can be cleared at home by running a short “drying” procedure. We recommend to:

  1. Place the light in an open, well-ventilated area with no obstructions around it.
  2. Set the fixture to 100% intensity.
  3. Let it run for 3-4 hours.
  4. Turn the light off and allow it to cool for 30-45 minutes.
This process helps drive out residual moisture inside the fixture. In most cases, condensation will not return after completing these steps. If the condition persists, please contact amaran Support.

For more details, see the frequently asked questions below.

Troubleshooting FAQs

Why is there condensation on the display of my amaran Ray 60c / 120c after using the fixtures the first few times?

Early units may have minor amounts of moisture trapped during manufacturing or shipping. Once the light is heated up to 100% intensity for 3–4 hours, the internal moisture is released and the issue typically does not reoccur.

Does condensation affect the performance or safety of my light?

No, this temporary condensation is only a visual effect. The amaran Ray 60c and 120c are IP54-rated, meaning they are protected against dust and splashes, and performance remains fully stable and safe.

Can I keep using the light while there is condensation?

Yes, condensation does not interfere with brightness, color accuracy, or menu operation. You can continue using the fixture safely while following the drying steps later.

Why does condensation occur more during the first few uses?

Early units may have minor amounts of moisture trapped during manufacturing or shipping. The amaran Ray 60c and 120c are IP54-rated – they are sealed against dust and splashes but not airtight, and small amounts of humidity can enter during shipping or storage. This does not cause any long term issues with the fixture. 

Should I return or exchange my light because of condensation?

Not immediately. Since this is a temporary issue that can be resolved by simply running the light to burn off the moisture, we recommend following the steps above. A 3-4 hour drying procedure will resolve the issue in most cases. If the condition persists, please contact amaran Support (https://amarancreators.com/pages/contact-support).