How do I trigger and adjust the light effect modes(FX mode) of Aputure products?

The "Lightning" and "Explosion" modes can only be triggered by short-pressing the buttons on the control box or through the Sidus Link app, and cannot be controlled by the remote control. Other effect modes can be controlled by the remote control (currently, LS 120d II, LS 300x, LS C300d II, LS 600d Pro, and LS 600x Pro are equipped with remote controls), or through the Sidus Link app and the control box. Press and hold the "Effect" key for 2 seconds to activate the light effect mode; then short-press the "Effect" key to switch between "Paparazzi", "Fireworks", "Fault bulb", "Lightning", and "TV" effects. Press and hold the "Effect" key again for 2 seconds to exit the light effect mode and restore the normal lighting. For the "Firework", "TV", and "Fire" effect modes, the color temperature cannot be set to a specific value; for other effect modes, the basic color temperature can be adjusted from 2700K to 6500K.