[LS 600c Pro II] Lighting Configuration & Settings

LS 600c Pro II Configuration & Settings

Press the button on the Control Box to enter the corresponding modes: MENU, LIGHT MODE, PRESET.

Menu

Press the MENU button to enter the System Menu interface. In the System Menu you'll find:

1. Output Mode
2. DMX Mode
3. Custom FX
4. Dimming Curves
5. Fan Mode
6. Studio Mode
7. Control System
8. Language
9. Product Information
10. Update
11. Factory Reset
12. Battery Power Option

Output Mode

Constant Output: The lamp's brightness is consistent throughout the color temperature range.

Max Output: The lamp's brightness is prioritized throughout the color temperature range.

DMX Mode

DMX Address: Turn the Select Wheel to set the DMX address. Press and hold the MENU for 2 seconds to lock the DMX Address. In the locked state, the display stays on this screen and the DMX Address cannot be changed. Press and hold SELECT again for 2 seconds to unlock. 

DMX Loss Behavior: rotate the Select Wheel to choose between Hold Last Settings/Black Out/Fade to Black/Hold 2 min & Fade Out. 

1. Hold Last Settings: when DMX signal is lost, DMX values will be retained until signal is regained. 

2. Black Out: when DMX signal is lost, the light will black out. 

3. Face to Black: when DMX signal is lost, the light will wait for 60 seconds before fading to black. 

4. Hold 2 min. & Fade Out: when DMX signal is lost, the DMX values are retained for two minutes before fading out over a time of 60 seconds. 

DMX Profile: "Select which DMX Profile would like to use to control your light. Refer to the Aputure DMX Chart for details."

Custom FX

Press the MENU button, rotate and press the Select Wheel to enter the Custom FX interface. 

You can choose to enter Picker FX or Music FX. 

Each type can save up to 10 custom FXs. "NO FX" refers to unsaved FX, and "Untitled" refers to saved FX. 

Dimming Curves

Rotate the Select Wheel and press to select between Exponential (Exp), Logarithmic (Log), Linear and S-Curve

Fan Mode

Rotate the Select Wheel and press to choose between Smart, High, Medium, and Silent fan mode. 

Smart: able to work in -20°C through 45°C environment, the lamp will automatically adjust the fan speed according to different ambient temperatures.

High: able to work in -20°C through 45°C environment, fan will maintain its highest speed. In High-Speed Mode, the fan uses the High Fan setting. 

Medium: Capable of working in -20°C through 35°C environments, the fan uses a medium speed.

Silent: able to work in -20°C through 45°C environment, the maximum output power of the fixture will be limited to 60W. In this mode, the fan produces the least amount of noise. 

Studio Mode

When the Studio Mode is enabled (ON), the fixture will power on when connected to live power. When Studio Mode is disabled (OFF), press the power button to power on or power off the fixture. 

Control System

The LS 600c Pro II is equipped with four remote control options: DMX, Sidus BT, CRMX and Ethernet (Art-Net/sACN). In the Control System menu is where settings for Sidus BT, CRMX, and Ethernet control protocols can be found. Only one control option can be used at a time.  

Sidus Bluetooth

When Bluetooth is "ON", the serial number is displayed here to facilitate connecting with the Sidus Link Pro and Sidus Link Apps. 

CRMX

When CRMX is ON/Enabled, the fixture will listen for it's previously linked Transmitter. If the fixture is currently unlinked, it will listen for a Transmitter link signal and link to any new CRMX link signal. Users can Unlink from previously linked Transmitters by selecting Unlink. 

Ethernet

In the Control System Menu, under Ethernet, are options for setting the device's IP and control protocol settings. 

There are two ways to set IP: manually set IP and automatically obtain IP. If you select manual setting, you can edit configuration items such as IP address, subnet mask, universe address, etc.; if you select automatic IP setting, the console will automatically assign an IP address. 

You can choose Art-Net or sACN protocol or automatic. 

Language

Select English or Chinese and press Select for confirmation. 

Product Information

By selecting "Product Information", you can view the Hardware Version of the Control box and Lamp Head and UID of the product. 

Update

In the "Update" interface, you can upgrade the firmware by inserting a USD flash drive with the latest firmware into the USB port of the control box and confirming that you want to update. THe current firmware version is also listed in this interface. NOTE: The Control Box and Lamp Head can also be updated via Sidus Link or Sidus Link Pro with Sidus BT turned ON and a Wi-Fi internet connection on your Sidus Link device. 

Factory Reset

Select "YES" if you wish to Factory Reset the fixture. Select "NO" to cancel. 

Battery Power Option

When using external batteries to power the LS 600c Pro II, actions for the batteries can be found in the Battery Power Option interface. 

Wake up Batteries: When you need to activate the lithium battery from overdischarge protection. Select the lithium battery specification 14.4V/26V and enter the Wake Up Batteries interface, confirm Activate to output 3A current in order to activate the lithium battery; After activation, check whether the lithium battery has a voltage output. If so, the activation is successful, otherwise the activation fails. 

Full Battery Power: a single lithium battery can meet the input power requirement of 360W continuous output (14.4 lithium battery maximum output current 30A, 26V lithium battery maximum output current 15A). The lithium batteries can meet the input power requirement of 720W, and the lamp can achieve 100% illumination Output. 

---

Accessing Lighting Modes

Press the LIGHT MODE Button on the Control box to enter the different modes: CCT, Adv. HSI, FX, RGB, x y, Source, and GEL. 

CCT

Adjust the color temperature (2300K-10000K) and the Green/Magenta level (-1.00 thru +1.00).

Advanced HSI

Select the Hue (0°-360°), Saturation (0-100%) and Color Temperature (2300K-10000K).

FX

Select between FX modes: Fireworks / Explosions / Flames / Paparazzi / Defective Bulb / TV / Pulse / Party Lights / Club / Color Chase / Candle / Welding / Police Car / Flash / Lightning

RGB

Set the values of Red, Green and Blue (0-100%) to achieve the desired color; then use the Master Intensity to raise and lower the overall brightness of the fixture without changing the colors individually. 

XY

Set the x or y coordinate value (0.0000-0.8000) and intensity. 

Source

Select the light source to mimic and find tune the xy coordinates.

GEL

Select the Intensity, base Color Temperature, Gel Series and desired Gel. 

Presets

10 Light Mode Presets can be saved. 

Choose your settings within the CCT, Adv. HSI, RGB, XY, Source or Gel light modes. Then press the PRESET button to open the Preset interface. Select the Preset number to open, replace or delete the Preset.