Help Center

Light Storm 60x

🚥Operation

[LS 60x] Getting Started

LS 60x Getting Started

1. Power on, the switch button can control the switching state of the Lamp Head.

ls60x_lamphead

2. Manual Control

1) Rotate CCT adjusting knob to adjust CCT, clockwise to change the cool color, counterclockwise to change the warm color. Stepless adjustment can be realized.

ls60x_cct_knob

Turn the brightness adjustment knob to adjust the brightness, clockwise to increase the brightness, counterclockwise to reduce the brightness. Stepless adjustment can be realized.

ls60x_brightness_knob

2) Click the MENU key to enter the MENU interface, as shown below. Rotate the "MENU" key to select MENU options, and click the "MENU" key to enter the selected MENU items. To exit the MENU interface, click the "MENU" key and select "exit" to return to the CCT interface.

ls60x_menu_items

3) CCT Mode
Select "CCT" from the menu interface and enter THE CCT mode. Rotate "MENU" to adjust CCT. Rotate the "OK" key to adjust the INT.Click "OK" to switch fixed CCTS: 2700K, 3200K, 4300K, 5600K, 6500K.

ls60x_cct_mode

4) FX Mode

Select "FX Mode" from the menu interface. Rotate and click "OK" to enter different FX modes.

ls60x_fx_mode

a. Paparazzi Mode

ls60x_paparazzi_mode

b. Fireworks Mode

ls60x_fireworks_mode

The CCT can be 3200K, 5600K or "random" in the firework light effect mode.

c. Faulty bulb Mode

ls60x_faulty_bulb_mode

d. Lightning Mode

ls60x_lightning_mode In lightning mode, short press the “OK” button to single trigger the light effect, long press the “OK” button to enter the cycle mode.

e. TV mode

ls60x_tv_mode In TV mode, the CCT can be switched between cool, neutral and warm colors

f. Pulsing Mode

ls60x_pulsing_mode

d. Strobe Mode

ls60x_strobe_mode

h. Explosion Mode

ls60x_explosion_mode In explosion mode, short press the Trigger button to single trigger the light effect

The adjustable frequency of explosion mode is 1-10.

i. Fire Mode

ls60x_fire_mode In Fire mode, the CCT can be switched between cool, neutral and warm colors.

Rotate the MENU key to select "CCT, INT, frequency", and then rotate the "OK" knob to adjust the CCT(2700K~6500K), brightness value (10% ~ 100%), and frequency [1-10, R (random)].

ls60x_cct,INT,frequency

As of writing, you cannot set a fixed base CCT for certain effects, such as: Fireworks, TV, and Fire.
If the light is powered off, upon turning on again, the light resumes its last saved setting.
In FX mode, click "MENU" to return to the light effects MENU interface. At this point, rotate "OK" to switch to different light effects. Click "MENU" again to return to the main MENU interface. At this time, the selected FX mode is still maintained. You can choose different options according to your needs, and select "CCT" to exit FX mode.

5) Wireless Mode

Users can connect devices with the name LS 60x ****** through the bluetooth of their mobile phones or tablets (six digits + letters are the serial number of the machine). At this time, they can control the devices wirelessly through their mobile phones or tablets.

ls60x_wirelessmode

Through the menu interface, select "Device serial number" to view the serial number of the device.

6) Dimming Curve Mode

Press “MENU” key to enter MENU mode, rotate “MENU” key to select "Dimming curve" item, click “MENU” key to enter "Dimming curve" mode, rotate "OK" key to select exponential, logarithmic, linear and "S" dimming curve, and then click "OK" key to confirm the selection.

ls60x_dimming_curve_mode 7) Studio Mode

Press “MENU” key to enter the MENU mode, rotate “MENU” key to select studio mode, click “MENU” key to enter studio mode, then rotate "OK" key to select "Yes" or "No", and click "OK" key to open or close studio mode.

ls60x_studio_mode

When Studio Mode is active, the light will turn on as soon as it receives power, without having to press the power button.

Studio Mode is active as the factory default

8) Bluetooth Reset

(1) Press “MENU” key to enter MENU mode, rotate “MENU” key to select Bluetooth reset, click “MENU” key to enter Bluetooth Reset mode, then rotate “OK” key to select "Yes" and press “OK” key short to reset Bluetooth (the current reset progress will be displayed on the pop-up interface, and the progress will be displayed within 5 seconds); Select "NO" to return to the previous menu.

ls60x_bluetooth_reset

(2) After resetting the light's Bluetooth connection, your mobile phone or tablet will be able to connect to and control the LS 60x.

(3) If the Bluetooth Reset fails, a [Reset Failed] screen will pop-up, and the light will return to Bluetooth mode after 2 seconds.

The light must be connected to your mobile device using the Sidus Link mobile application, and not via your device's typical Bluetooth connection menu.

9) Language

Press “MENU” key to enter MENU mode, rotate “MENU” key to select Language, click “MENU” key to enter Language MENU, rotate “OK” key to select English or Chinese, and then click “OK “key to confirm the selection.

ls60x_language

The factory default language is English.

10) Firmware Version

Press the “MENU” key to enter the MENU mode, rotate the “MENU” key to select the firmware version number, click the key to enter the "Firmware version Number" interface, and then you can see the version information of the firmware.

ls60x_firmware_version 11) OTA Mode

Firmware updates can be updated online via the Sidus Link app for OTA updates.

12) Focusing

Optical "wide Angle" and "focus" can be achieved by rotating the focusing knob, clockwise rotation of the focusing knob to achieve "focus", counterclockwise rotation of the focusing knob to achieve "wide Angle".

ls60x_focusing

13) Using the Sidus Link APP

You can download the Sidus Link app from the iOS App Store or Google Play Store for enhancing the functionality of the light. Please visit sidus.link/app/help for more details regarding how to use the app to control your Aputure lights.

ls60x_sidus_app_qr