[LS 60x] Power Supply

Rotate the red rotary ring of the DC input connector clockwise, then pull out to remove the adapter.

When using a single battery for power supply, be sure to install the battery in the battery slot corresponding to the red key.

When removing the battery, press the red lock button to pull out the battery. Do not hard pull out.

Rotate the red rotary ring of the DC input connector clockwise and then pull it out to remove the battery case. Do not pull it out forcibly.

Single battery: Voltage 6~8.4V; Recommended ≥6.6A continuous discharge.

When using dual battery power supply, install the battery in the battery slot corresponding to the red/black lock key successively; When removing the battery, press the red/black lock button and then pull out the battery one by one. Do not pull it out forcibly.

Rotate the red rotary ring of the DC input connector clockwise and then pull it out to remove the battery case. Do not pull it out forcibly.

Dual battery: Voltage 12~16.8V; Recommended ≥6.6A continuous discharge.

V-mount batteries are available for purchase.

Rotate the red rotary ring of the DC input connector clockwise and then pull it out to remove the D-tap to DC Cable. Do not pull it out forcibly.

Press the V port seat button and pull out the V-Mount battery upward. Do not pull it out forcibly

Do not use a battery with a specification of more than 21V. Using the wrong battery will cause damage to the lamp.

Only use batteries that support the necessary continuous current discharge specifications mentioned above. If non-compatible batteries are used, the batteries will enter a protection state and the lighting fixture will not operate as intended.