🎮DMX Profiles
      Back to home
      1. Help Center
      2. MC Pro
      3. 🎮DMX Profiles

      [MC Pro] DMX Profiles and Settings

      MC Pro DMX Profiles and Settings

      DMX Profiles

      MC Pro DMX Profile Specification v1.0

      DMX Settings

      Rotate and press the Function Control Knob to select DMX Settings in system menu. 

      Rotate and press the Function Control Knob to select between:

      • DMX Settings
      • CRMX Settings

      DMX Settings

      Rotate and press the knob to select between DMX Address/DMX Profiles/DMX Loss Behavior.

      DMX Address: Choose the DMX address of MC Pro, press and hold the Function Control Knob for 2 seconds to lock/unlock the DMX address screen--this prevents unwanted changes to the fixture settings while the screen is locked.

      DMX Profiles: Rotate the Function Control Knob to choose the DMX profile.

      MC Pro DMX Profile Specification v1.0

      DMX Loss Behavior:
      1. Hold Last Settings: After DMX signal is lost, remember the last control setting.
      2. Black Out: When the DMX signal is lost, it will be black out.
      3. Fade To Black: After DMX signal is lost, it will fade to black in 60 seconds.
      4. Hold 2min & Fade Out: After the DMX signal is lost, keep the last control setting for two minutes, and then fade to black within 60 seconds.

      Screen Shot 2023-07-12 at 3.21.48 PM

       

      DMX Address Screen or DMX Settings Screen must be visible for Hard Line DMX or CRMX data to have affect on the fixture.

      * The fade-out time decreases as the percentage of brightness decreases. When the brightness output is 100%, the fade-out time is 60 seconds, which decreases in sequence.
      * If the signal is reconnected, the DMX console will continue to maintain the signal output as same as before.

      CRMX Settings

      Rotate and press the Function Control Knob to select CRMX Settings in DMX Settings Menu.

      CRMX Status: When CRMX Status is Enabled/ON, it will continuously search for a linkable signal in the background to connect.

      Unpair: Unpair will disconnect the currently established connection so that a different transmitter can be paired.

      Screen Shot 2023-07-12 at 3.25.44 PM

      If BT Settings (Sidus Link Mesh BT) is enabled ("ON"), then CRMX is disabled ("OFF") automatically.  If CRMX is enabled ("ON"), the BT Settings (Sidus Mesh BT) are disabled ("OFF") automatically.  

      NOTE:  The MC Pro does not show an animation while linking to a new Tx.