🚥Operation
      Back to home
      1. Help Center
      2. Electro Storm Motorized Yoke
      3. 🚥Operation

      [Motorized Yoke] Installation of Motorized Yoke

      Installation of Motorized Yoke

      The Motorized Yoke can be mounted on light stands using the Junior Pin Attachment or mounted on trusses using the Pipe Clamp Adapters.  

      Attaching the Junior Pin Attachment

      motorized_yoke_attaching_the_junior_pin_attachment

      1. Junior Pin Attachment

      2. Hex Key                   

      		 3. M6 Screws (4x) 4. Spring Washers (4x)

      motorized_yoke_attaching_the_junior_pin_attachment_step_1

      1. Insert screws through Spring Washers and Attachment into Mounting Holes.

      motorized_yoke_attaching_the_junior_pin_attachment_step_2

      2. Align Mounting Holes.

      motorized_yoke_attaching_the_junior_pin_attachment_step_3

      3. Insert Screws through Spring Washers and Attachment into Mounting Holes.

      motorized_yoke_attaching_the_junior_pin_attachment_step_4

      4. Tighten the Hex Key.

      motorized_yoke_attaching_the_junior_pin_attachment_step_5

      5. Install the Motorized Yoke to the light stand. 

      Attaching the Pipe Clamp Adapters

      motorized_yoke_attaching_the_pipe_clamp_adapters_step_1-1

      1. Tie Down

      2. Mounting Lock

      motorized_yoke_attaching_the_pipe_clamp_adapters_step_21. Mounting Lock Holes.

      motorized_yoke_attaching_the_pipe_clamp_adapters_step_32. Align Mounting Locks with Holes. 

       

      motorized_yoke_attaching_the_pipe_clamp_adapters_step_43. Lock the Clamps

      motorized_yoke_attaching_the_pipe_clamp_adapters_step_54. Install the Motorized Yoke onto the truss. 

      motorized_yoke_attaching_the_pipe_clamp_adapters_step_65. Tighten the Tie Downs. 

       

      motorized_yoke_attaching_the_pipe_clamp_adapters_step_7