[STORM 1000c] Firmware Update V1.8

Download Version 1.8 here

This update must be performed with a USB drive. The update over Sidus Link and Sidus Link Pro will be coming soon.

Improved text for fan mode DMX control, fan error messages, and high temperature warning screens to ensure all text displays correctly.
Improved temperature error reporting for both the control box MCU (EC.002) and COB temperature (EH.002), clearly distinguishing high temperature, short circuit, and open circuit conditions.
Updated fan control logic to improve stability and make fan-related errors general and ignorable during normal operation.
Improved indicator light behavior so ignoring all active errors restores the indicator light to its normal operating color.
Improved low-temperature detection accuracy, preventing incorrect error states during low-temperature operation.

Fixed an issue where DMX VRGB color space output could behave abnormally.
Fixed an issue where low-temperature testing could cause red and green indicator lights to flash due to incorrect NTC open-circuit detection thresholds.
Fixed an issue where odd and even DMX profiles could produce different brightness output at the same values when using 16-bit DMX, ensuring consistent brightness behavior.
Fixed an issue where the fixture could flash unexpectedly when switching high-speed photography modes or dimming curves.
Fixed the Light Mode HSIC+ Hue value should be 359.9 > 0.0 degree.

Update for the Storm 1000c Minor Issues