- Help Center
- General Help
-
General Help
-
STORM 80c
-
STORM 1000c
-
STORM 1200x
-
Electro Storm CS15
-
Electro Storm XT26
-
INFINIBAR
-
MT Pro
-
MC Pro
-
Nova P300c & P600c
-
INFINIMAT
-
Sidus One
-
Sidus Four
-
Light Storm 600c Pro
-
Light Storm 600c Pro II
-
Light Storm 1200d Pro
-
Light Storm 600x Pro
-
Light Storm 600d Pro
-
Light Storm 600d
-
Light Storm 300x
-
Light Storm 300d II
-
Light Storm 60x
-
Light Storm 60d
-
Accent B7c
-
MC
-
Sidus Link Bridge
-
Modifiers & Accessories
-
Electro Storm Motorized F14 Fresnel
-
Electro Storm Motorized Yoke
-
Spotlight Max
-
amaran Flexible Lights
-
amaran Pixel Tubes
-
amaran T2c & T4c
-
amaran P60c & P60x
-
amaran 150c & 300c
-
amaran COB 60d S
-
amaran COB 60x S
-
amaran 100d S & 200d S
-
amaran 100x S & 200x S
-
amaran SM5c
-
amaran Ace 25c
-
amaran Ace 25x
[STORM Series] Update Firmware via a USB Flash Drive
Instructions on how to update the firmware on each light with a USB flash drive.
The STORM series lights can be updated with a USB-A flash drive (or with a USB-C flash drive for the Storm 80c). We recommend a flash drive with a 128GB capacity or less, formatted as FAT 32.
To do so, do the following:
- Get the firmware for the light you wish to update by browsing to its product page on www.Aputure.com/
- Click the Storm Product Family ➡️ Product page, then scroll down to the Downloads section of the light's product page.
- The Storm 80c firmware can be found here: https://aputure.com/en-US/products/storm-80c?Title=Default+Title#downloads
- The Storm 1000c firmware can be found here: https://aputure.com/en-US/products/storm-1000c?Title=Default+Title#download
- Download the latest Zip file for the firmware you are installing. Take note if there are any release notes.
- Extract the Zip file onto your computer.
- Copy the extracted files onto the root of the USB drive (or USB-C for the 80c). They should not be in any folder.
- Insert USB Drive into the STORM light.
- From the Main menu, go to System Settings ➡️ Firmware Update.
- Select Update Firmware and then "Yes"
The Firmware File should be an unzipped ".bin" file on the root of your USB-C flash drive.
To see what Firmware Version the fixture is currently using, select "Firmware Version".
Most Firmware updates can also be done via Sidus Link app using OTA (Over the Air Technology). 80c V1.7, 1000c V1.4 must be updated over USB.