Skip to content
English
Go to Aputure.com
  • There are no suggestions because the search field is empty.

[amaran P60x-P60c] Getting Started

Powering and Setting up P60x and P60c

P60c and P60x Installation

1. The Lamp Fixing

Screw the 1/4’’ to 3/8’’ screw clockwise into the 1/4’’ copper nut at thebottom (or side) of the LED lamp, and tighten it; Connect the 1/4’’ to 3/8’’ screw and the lamp holder through the lamp holder support column, adjust the appropriate angle and tighten it.

p60c-p60x_lamp_fixing

2. Softbox installation

The light soft box can be installed according to the needs of use.

p60c-p60x_softb0x_install_1

1. Stretch soft box

 p60c-p60x_softbox_install_2

 2. Straighten the two support rodson both sides of the soft box to become a support rod
p60c-p60x_softbox_install_3

 3. Install the soft box to the lamp body

 p60c-p60x_softbox_install_4

 4. The grid can be installed according to the requirements

P60c: Turning on the light

After connecting the lamp body to an appropriate power source, press the power switch to start the P60c.

p60c_turning_on_the_light

P60x: Turning on the Light

After connecting the lamp body to an appropriate power source, press the power switch to start the P60x.

p60x_turning_on_the_light