Skip to content
English
Go to Aputure.com
  • There are no suggestions because the search field is empty.

[amaran Pixel Tubes] Getting Started

Setting up and powering the amaran PT1c, PT2c, & PT4c

Power ON/OFF

Press and hold the Power Button for 3 seconds to turn the amaran PT on or off.

Screen Shot 2023-07-08 at 4.00.59 PM

USB-C Charging

Screen Shot 2023-07-08 at 4.03.16 PM

Note: PT1c only supports 5V/2A power adapter or mobile power charging.
Note: Charging rate will slow down when the light is powered on. Turn the light off for optimal charging.

 

PT1c ONLY:

If your PT1c is in the "No Battery" Power Mode, then the fixture will not Power ON without AC power supplied.  

Power Mode : Press the Up/Down buttons and press the OK button to select a Power Mode.

Screen Shot 2023-07-08 at 4.06.34 PM

With battery: Optimize battery life by prioritizing power supply when equipped with batteries.
No battery : Operate the light with a power adapter plugged in without battery, please turn on this function after removing the battery.