Skip to content
English
Go to Aputure.com
  • There are no suggestions because the search field is empty.

[Electro Storm CS15] Getting Started

Setup

Installation and Removal of the CS15 Yoke

① Installation of CS15Yoke

Insert the CS15's Junior Pin into a rigid Junior Receiver and lock in place. Align the lamp head with the quick release plates on both sides and install until locked.electro-storm-cs15-install-ushape

② Disassembly of CS15 Yoke

While holding the Carrying Handle of the lamp, turn the Yoke Release Lever on both sides of the yoke until they unlock. Lift the lamp head upwards to remove it from the yoke.electro-storm-cs15-disassemble-ushape

The Yoke Release Lever will display red on the sides if the lamp is not completely seated and locked. Please re-align and insert the lamp again until the Yoke Release Lever show no red and a "click" noise of the plate locking has been heard.

It is recommended to install and disassemble the lamp and yoke while the yoke is sturdy and upright.

 

Disassembly and Installation of Aputure Mount Protection Cover

Press the button in the direction indicated by the arrow and rotate the protection cover. Rotate the protection cover in the reverse direction for its installation.

 

Disassembly of protection coverelectro-storm-cs15-disassemble-cover

Installation of protection coverelectro-storm-cs15-install-cover-2

Make sure to remove the Aputure Mount Protection Cover before using the device. Install the Aputure Mount Protection Cover for transport and storage.

 

Installation and Disassembly of Standard Reflector/Barn Doors Adapter

Press the Mount Release Button and insert and rotate the Standard Reflector/Adapter until it locks in place; reverse to remove.

 

Installation of Standard Reflectorelectro-storm-cs15-install-reflector-1

Removal of Standard Reflectorelectro-storm-cs15-remove-reflector

 

Installation of Barn Doors Adapterelectro-storm-cs15-install-barndoors

Removal of Barn Doors Adapterelectro-storm-cs15-remove-barndoors

 

With Barn Doors Adapterelectro-storm-cs15-install-barndoorsadapter

electro-storm-cs15-install-barndooradapter1

With Standard Reflectorelectro-storm-cs15-install-standardreflector

electro-storm-cs15-install-standardreflector1

 

Lamp Adjustment

The lamp angle can be adjusted by loosening the disc brake handles.electro-storm-cs15-lamp-adjustment

 

Installation and Disassembly of Control Box Dolly

1 Unfold the control box dollyelectro-storm-cs15-unflodboxdolly

2 Lift the control box and install it into the quick release mechanism of the dollyelectro-storm-cs15-liftcontrolbox

3 To remove the Control Box from the dolly, press the release button and lift up on the Control Boxelectro-storm-cs15-removecontrolbox

4 Fold and store the dollyelectro-storm-cs15-folddolly

 

Connection of Lamp with Control Boxelectro-storm-cs15-connectionoflamp