Skip to content
English
Go to Aputure.com
  • There are no suggestions because the search field is empty.

[LS 300d II] FX Mode

FX Mode of LS 300d II

LS300d II

Lighting FX Mode

Press and hold the Effects button for 2 seconds to activate Lighting FX mode, then short press the Effects button to toggle between Paparazzi, Fireworks, Fault Bulb, Lightning, TV, Pulsing, Strobe, Explosion, etc.

a. Paparazzi Mode

ls300dII_paparazzi_mode

b. Fireworks Mode

ls300dII_fireworks

c. Fault bulb Mode

ls300dII_fault_bulb

d. Lighting Mode

ls300dII_lightning

In lighting mode, short press the Trigger button to single trigger the light effect. long press the Trigger button to enter the cycle mode.

e. TV Mode

ls300dII_tv

f. Pulsing Mode

ls300dII_pulsing-1

g. Strobe Mode

ls300dII_strobe

h. Explosion Mode

ls300dII_explosion

In explosion mode, short press the Trigger button to single trigger the light effect.

When in Lighting FX mode, short press the "Intensity" button to enter Intensity Adjustment Mode. Then rotate the brightness dimming wheel to adjust the intensity from 10% to 100% as displayed on the screen.

ls300dII_paparazzi_intensity

When in Lighting FX mode, short press the "Frequency" button to enter Frequency Adjustment Mode. Then rotate the brightness dimming wheel to adjust the frequency of the effect from 1 to 10 and R (Random) as displayed on the screen.

ls300dII_paparazzi_frequency

If the light is powered off, upon turning on again, the light resumes its last saved setting.