Skip to content
English
Go to Aputure.com
  • There are no suggestions because the search field is empty.

[LS 300x] FX Mode

FX Mode of LS 300x

LS 300x

Press and hold the Effects button for 2 seconds to activate Lighting FX mode, then 
short press the Effects button to toggle between Paparazzi, Fireworks, Faulty Bulb, 
Lightning, TV, Pulsing, Strobe, Explosion, Fire, etc.

Paparazzi Effect

ls300x_paparazzi_intensity

 Fireworks Effect

ls300x_fireworks

Faulty Bulb Effect

ls300x_faulty_bulb

Lightning Effect

ls300x_lightning

As of writing this the Fireworks effect worked in a CCT range presets include three choices of 3200K/5600K/Random.

When controlling the lightning effect, short press the Trigger button to single trigger the lighting effect; long press the Trigger button to enter the Lightning Cycle Mode.

TV Effect

ls300x_tv_effect

Pulsing Effect

ls300x_pulsing

Strobe Effect

ls300x_strobe

Explosion Effect

ls300x_explosion

Fire Effect

ls300x_fire

  

As of writing this the TV effect worked in CCT range presets and you cannot set a fixed base CCT.

When controlling the explosion effect, short press the Trigger button to single trigger the lighting effect.

As of writing this the Fire effect worked in CCT range presets and you cannot set a fixed base CCT.

When in Lighting FX mode, short press the "Intensity" button to enter Intensity Adjustment Mode. Then rotate the Brightness Control Wheel to adjust the intensity from 10%-100% as displayed on the screen.

ls300x_paparazzi_intensityWhen in Lighting FX mode, short press the "Frequency" button to enter Frequency Adjustment Mode. Then rotate the Brightness Control Wheel to adjust the frequency of the effect from 1 to 10 and R (Random) as displayed on the screen.

ls300x_paparazzi_frequency

When in Lighting FX mode, rotate the CCT Control Wheel to adjust the base CCT of the lighting effect from 2700K to 6500K as displayed on the screen.

ls300x_paparazzi_cct_control_wheel

 As of writing, you cannot set a fixed base CCT for certain effects, such as: Fireworks, TV, and Fire.

If the light is powered off, upon turning on again, the light will resume its last saved setting.