Skip to content
English
Go to Aputure.com
  • There are no suggestions because the search field is empty.

[LS 600d Pro] Controlling Device via DMX

Controlling LS 600d Pro via DMX

Controlling Device via DMX

1. Connect the DMX Controller's OUTPUT to the 600d Pro's controller INPUT as shown in the figure below. 

ls_600d_pro_controlling_via_dmx

2. DMX Chart

DMX Channel Values / Functions (5 DMX Channels)
Channel Value Function
1   Dimmer
0-255 Intensity 0 to 100%
2   Mode Selection
0-127 Manual Mode
128-255 FX Mode
3   FX Control
0-19 Paparazzi
20-39 Fireworks
40-59 Faulty Bulb
60-79 Lightning
80-99 TV
100-119 Pulsing
120-139 Strobe
140-159 Explosion
160-255 Undefined
4   FX Frequency Control
0-19 1

20-39

 2
40-59 3
60-79 4
80-99 5
100-119 6
120-139 7
140-159 8
160-179 9
180-199 10
200-219 R
220-255 Undefined
5   IN Lightning Mode
0-9 Start Point
10-127 Single Trigger
128-255 Cycle Mode
  IN Explosion Mode
0-9 Start Point
10-127 Single Trigger
128-255 Undefined

In DMX Mode, Intensity, FX Frequency and Lighting Effects can only be controlled by a DMX controller.

When controlling multiple LS 600d Pro lights independently (i.e., A and B), offset each light by 5 channels. If you set light A to DMX 001, set light B at DMX 006, to control A and B separately on the DMX Controller.