Skip to content
English
Go to Aputure.com
  • There are no suggestions because the search field is empty.

[LS 600d Pro] Power Options

LS 600d Pro Powering Up the Control Box

Powering up the controller

  1. Powering by AC
    ls_600d_pro_powering_by_ac

1. Neutrik®️ powerCON Female Locking Connector

2. Neutrik®️ powerCON Male Connector

To disconnect the Neutrik®️ powerCON cable, pull back on the yellow release tab on the cable connector, and rotate the connector counterclockwise. 

2.   Powering by Batteries

ls_600d_pro_powering-by-batteries

Battery Requirements: V/AB-Mount Batteries: 14.4V (15A) - 28.8V (7.5-15A) DC Input: 48V (15A) (720W Load)

Customers can choose V-Mount or A-Mount battery plates for their control boxes upon purchase according to their needs.  

Charge Batteries

When selecting the Exponential (Exp) or Linear dimming curve option, you can charge batteries if the brightness intensity is ≤ 70%. When selecting the Logarithmic (Log) dimming curve option you can charge the batteries if the brightness intensity is  ≤ 30%. When selecting the S-Curve dimming curve option, you can charge batteries if the brightness intensity is  ≤ 55%.