Skip to content
English
Go to Aputure.com
  • There are no suggestions because the search field is empty.

[NovaP300c-NovaP600c] Fixture Details & Buttons

Nova P300c & Nova P600c Buttons & Fixture Details

P300c

nova_p300c_light-1

  1. Accessory Slot
  2. Fixed Diffusion Panel
  3. Disk Brake Handle
  4. Yoke
  5. T-Handle / Baby Pin Mounting Screw
  6. Dual Junior/Baby Pin Small text underneath: (1-1/18in. / 28mm | 5/8in / 16mm)
  7. T-Handle Storage Hole
  8. Cable Relief Hook
  9. Quick-Release "Lightning Clamp" Receiver
  10. Carrying Handle/Floor Stand
  11. Control Box Input Smaller Text: (5-pin Male XLR)
  12. Battery Input Smaller text: (3-Pin Male XLR)
  13. Neutrik® powerCON AC Power Input

Controller Box Detail

  1. nova_300c_controller_boxCCT / Hue / Secondary Control Knob
  2. USB Port
  3. Preset Buttons
  4. Menu Button
  5. Light Mode Button
  6. Green-Magenta / Saturation / Tertiary Control Knob
  7. Intensity / Main Control Knob
  8. OLED Display
  9. Paracord Strap Plate
  10. Power Button
  11. "Lightning Clamp" Quick-Release Plate

P600c

nova_p600c_light-1

  1. Accessory Slot
  2. Fixed Diffusion Panel
  3. Disk Brake Handle
  4. Yoke
  5. Lamp Support Column
  6. T-Handle Storage Hole
  7. Pogo Pin
  8. Carrying Handle
  9. Quick Release
  10. Control Box Input (5-Pin Male XLR)
  11. Battery Input (3-Pin Male XLR)

  12. Neutrik® power CON AC Power Input

Controller Box Detail

nova_p600c_controller_box_details

  1. CCT / Hue Wheel
  2. USB Port
  3. Preset Buttons
  4. Menu Button
  5. Light Mode Button
  6. Green-Magenta / SAT Wheel
  7. Intensity/Main Control Knob
  8. OLED Display
  9. Paracord Strap Plate
  10. Electrical contacts
  11. Quick- Release Plate
  12. Power Button

 * "Electrical Contacts" on P600c only

nova_p600c_controller_box_details-2

  1. 5-Pin Female XLR Control Box Input
  2. DMX IN Port
  3. DMX OUT Port

"5-Pin Female XLR Control Box Input" connects the lamp head to the (red colored) Control Box Input port only.  

Fixture Presets

There are 4 Preset Buttons on the Control Box. After setting the light to the desired output mode, long press any one of the four buttons 1, 2, 3, 4 to start the process of saving the preset, and use the INT knob to select "Yes/No". Then, you can use these preset buttons in while in any mode to activate the preset mode and content previously saved to the preset.

Screen Shot 2023-07-11 at 11.02.27 AM

Presets will change the Manual Mode to whichever mode you used to store the preset.