Skip to content
English
Go to Aputure.com
  • There are no suggestions because the search field is empty.

[STORM XT52] Firmware Update V1.4

Summary of the Updates to STORM XT52

Released 6/10/2025
Download Version 1.4 here

This update must be done on USB. It cannot yet be updated over Sidus Link or Sidus Link Pro.

For updating firmware form version 1.2 and later, please update normally by copying files to a USB Drive.

WARNING: If updating firmware from version 1.0 or 1.1, please see update Instructions Below.

New Features

  1. Supports Auto-Patching and Auto-Configuration for Sidus Link Pro V2.0

  2. Added Bluetooth upgrade support (this version and above support Bluetooth upgrades).

  3. CRMX PIN reset (restoring factory settings resets PIN to default).

  4. Updated NFC linking-key setup method.

Optimizations

  1. Updated Water Cooling Detection

  2. Added environmental limits for low-temperature operation.

  3. Improved DMX fade time and on/off responsiveness by optimizing DMX data forwarding and light thread handling.

  4. Shortened button shortcut trigger time to 5 seconds.

  5. Optimized high/low voltage logic during startup to prevent incorrect adapter detection.

  6. Added a dedicated thread for more stable DMX processing.

  7. Improved 96V shutdown detection logic during upgrades to avoid false upgrade failure reports.

  8. Reduced memory usage by moving images to external flash and converting global variables to local.

  9. Refined protective cover detection logic for quicker response.

  10. Improved flicker performance in the 15%–35% brightness range.

Bug Fixes

  1. Fixed CRMX reset not clearing RX or switching TX to RX properly.
  2. Resolved system freeze caused by memory allocation failure when Ethernet and DMX were connected simultaneously.
  3. Removed false error codes caused by adapter communication interference.
  4. Replaced immediate power-off memory save with timed memory write to ensure data retention.
  5. Removed lamp connection cable icon to prevent title bar overflow.
  6. Fixed Follow Mode not updating the light mode UI.
  7. Corrected flame effect displaying the wrong color.
  8. Fixed issue where the indicator light turned red after upgrade and did not reset (watchdog added to boot).
  9. Disabled automatic lamp shutdown after upgrade; control now handles power-off separately.
  10. Corrected false water pump error codes triggered by low-temperature conditions.
  11. Fixed XT52 effect renaming issue.
  12. Filtered false dual error codes caused by COB NTC short-circuit protection at 125°C.
  13. Removed 3500 RPM smart mode and legacy no-load detection due to false positives; unified detection logic at 5500 RPM.

Update Instructions for versions 1.0 and 1.1,

  • For firmware versions 1.0 and 1.1, the update procedure must be followed in the exact order below. Failure to do so may result in the light becoming non-functional.

Step 1: Update BMP and DRV Files

  1. Copy the *.bmp and *.drv files to the USB drive. Make sure you do not copy the *.ctr file to the USB Drive.

  2. Power on the XT52 fixture and set the brightness to 0%.

  3. Insert the USB drive into the XT52.

  4. Navigate to the Update Firmware menu and trigger the update.

  5. Once the upgrade is complete, remove the head cable from the control box.

  6. Delete the *.bmp and *.drv files from the USB drive.

Step 2: Update CTR File

  1. Copy the *.ctr file to the USB drive.

  2. Insert the USB drive into the XT52.

  3. Navigate to the menu and trigger the second upgrade.