Skip to content
English
Go to Aputure.com
  • There are no suggestions because the search field is empty.

[B7c] Manual Control

Instructions to Operate B7c

1. Power On/Off

Press the power button in the center of the light to toggle the fixture on or off.
When in "Standby Mode," short-press the power button once to toggle the fixture on and off.

To fully shut down the fixture or to turn it off from a shutdown state, long-press the power button for 3 seconds.
When the bulb powers on from a standby or off state, it will resume its previous settings.

2. CCT Mode

You can toggle through the six built-in CCT presets by double-pressing power button: 2000K, 2700K, 3200K, 4300K, 5500K, 6500K. You can also adjust the B7c’s CCT more precisely between 2,000K-10,000K using the Sidus Link App.

3. Brightness

You can toggle through ten steps of brightness adjustment using the onboard controls, or choose a precise output level using the Sidus Link App. Press the“+” button to increase the brightness or press the “-” button to decrease the brightness. This will cycle between 10 dimming presets between 10% to 100%. You can also adjust the brightness more precisely using the Sidus Link App.