- Help Center
- Electro Storm CS15
- 🚥Operation
-
General Help
-
Electro Storm CS15
-
Electro Storm XT26
-
INFINIBAR
-
MT Pro
-
MC Pro
-
Nova P300c & P600c
-
Sidus One
-
Light Storm 600c Pro
-
Light Storm 1200d Pro
-
Light Storm 600x Pro
-
Light Storm 600d Pro
-
Light Storm 600d
-
Light Storm 300x
-
Light Storm 300d II
-
Light Storm 60x
-
Light Storm 60d
-
Accent B7c
-
MC
-
Sidus Link Bridge
-
amaran Flexible Lights
-
amaran Pixel Tubes
-
amaran T2c & T4c
-
amaran P60c & P60x
-
amaran 150c & 300c
-
amaran COB 60d S
-
amaran COB 60x S
-
amaran 100d S & 200d S
-
amaran 100x S & 200x S
-
amaran SM5c
-
Modifiers & Accessories
-
Electro Storm Motorized F14 Fresnel
-
Spotlight Max
-
Electro Storm Motorized Yoke
[Electro Storm CS15] Getting Started
Setup
Installation and Removal of the CS15 Yoke
① Installation of CS15Yoke
Insert the CS15's Junior Pin into a rigid Junior Receiver and lock in place. Align the lamp head with the quick release plates on both sides and install until locked.
② Disassembly of CS15 Yoke
While holding the Carrying Handle of the lamp, turn the Yoke Release Lever on both sides of the yoke until they unlock. Lift the lamp head upwards to remove it from the yoke.
The Yoke Release Lever will display red on the sides if the lamp is not completely seated and locked. Please re-align and insert the lamp again until the Yoke Release Lever show no red and a "click" noise of the plate locking has been heard.
It is recommended to install and disassemble the lamp and yoke while the yoke is sturdy and upright.
Disassembly and Installation of Aputure Mount Protection Cover
Press the button in the direction indicated by the arrow and rotate the protection cover. Rotate the protection cover in the reverse direction for its installation.
Disassembly of protection cover
Installation of protection cover
Make sure to remove the Aputure Mount Protection Cover before using the device. Install the Aputure Mount Protection Cover for transport and storage.
Installation and Disassembly of Standard Reflector/Barn Doors Adapter
Press the Mount Release Button and insert and rotate the Standard Reflector/Adapter until it locks in place; reverse to remove.
Installation of Standard Reflector
Removal of Standard Reflector
Installation of Barn Doors Adapter
Removal of Barn Doors Adapter
With Barn Doors Adapter
With Standard Reflector
Lamp Adjustment
The lamp angle can be adjusted by loosening the disc brake handles.
Installation and Disassembly of Control Box Dolly
1 Unfold the control box dolly
2 Lift the control box and install it into the quick release mechanism of the dolly
3 To remove the Control Box from the dolly, press the release button and lift up on the Control Box
4 Fold and store the dolly
Connection of Lamp with Control Box![electro-storm-cs15-connectionoflamp](https://help.aputure.com/hs-fs/hubfs/Knowledge%20Base/Aputure/Electro%20Storm%20CS15/images/electro-storm-cs15-connectionoflamp.png?width=688&height=802&name=electro-storm-cs15-connectionoflamp.png)