[Electro Storm CS15] Light Configuration and Settings

Light Configuration and Settings of Electro Storm CS15

1. Settings

Press "MENU" to access the interface of the various settings. Choose between: Output Settings,
High-Speed Mode, Dimming Curve, Control System, Studio Mode, Fan Mode, Update, Product Info,Custom FX, Language, Factory Reset, Accessory, Lead/Follow Mode.

Screenshot 2024-02-09 at 3.17.18 AM

2. Output Settings
(1) Constant Output: The lamp's brightness is consistent throughout the color temperature range.
(2) Max Output: The lamp's brightness is prioritized throughout the color temperature range.

Screenshot 2024-02-09 at 3.19.09 AM

3. Max Power Settings: When you choose the indoor power supply cable, this function will be
unlocked; you can also release the indoor power supply limitation manually.

Screenshot 2024-02-09 at 3.21.19 AM

The indoor power supply is available separately in some regions. When the cable is connected to the power supply, the fixture will automatically match the maximum indoor power in the region where it is applied; the user may release the power limitation in the interface. Please note that selecting this option may lead to the overload of your power supply circuit and result in safety considerations!

4. High-Speed Mode

Screenshot 2024-02-09 at 3.28.16 AM

If you turn on High-Speed Mode:
(1) The intensity of the lamp is set to a minimum 0f 20%. No level below 20% is allowed while using High-Speed Mode.
(2) FX Modes cannot be utilized in High-Speed Mode.
(3) Controlling the light with DMX data is not allowed in High-Speed mode. If the unit detect DMX data, then High-Speed Mode is automatically disabled.

5. Dimming Curve
The following Dimming Curves are available: Linear, Logarithmic, S-Curve and Exponential.

Screenshot 2024-02-09 at 3.30.26 AM