🚥Operation
      Back to home
      1. Help Center
      2. Light Storm 600c Pro II
      3. 🚥Operation

      [LS 600c Pro II] Getting Started

      Setting up and powering the LS 600c Pro II

      Attaching/Detaching the Protection Cover

      To detach the cover, press the release button and rotate the protection cover clockwise. To reattach the cover, insert it into the Bowens Mount, and rotate in the reverse direction.  

      ls_600c_pro_11_attaching_detaching_the_protection_cover

      Always remove the protection cover prior to turning on the light. Always re-install the cover when transporting the light.

      Attaching/Detaching the Bowens Mount Hyper Reflector (LS 600 Series)

      To install a reflector, press the release button and insert the reflector. Rotate the reflector counter clockwise and release the button. To detach the reflector, press the release button and turn the reflector clockwise. ls_600c_pro_11_attaching_detaching_the_bowens_mount_hyper_reflector

      Setting Up the Lamp Head

      When using a 5/8in/16mm (Baby Pin) stand, then mount the Lamp Head onto the stand, and tighten in place using the T-Handle/Mounting Screw on the Baby Pin Receiver. 

      When using a 1.125in/28mm (Junior Receiver) stand, remove the T-Handle from the yoke and then mount the Lamp Head into the Junior Receiver. Loosen or tighten the disc brake handle on the yoke to adjust the fixture's angle of tilt. 

      ls_600c_pro_11_setting_up_the_lamp_head

      Using the Lightning Clamp

      1. Attach the Lightning Clamp onto a light stand.
      2. To attach the Control Box, rotate the release lever to unlock the quick-release plate.
        Then mount the Control Box onto the Lightning Clamp (the release lever will spring back) and check that it is secure.  
      3. To remove the Control Box, grasp it firmly, and unlock the quick-release plate by turning its lever. 

      ls_600c_pro_II_using_the_lightning_clamp

      Connecting the Lamp Head to the Control Box

      Connect the Lamp Head to the control box using the 7-pin Weatherproof Head Cable. 

      ls_600c_pro_II_connecting_the_lamp_head_to_the_control_box

      Hang the cable using the strain relief to manage and reduce tension on the cable.

      Disconnect the Head Cable by pulling up on the connector's collar; this will disengage its locking mechanism. Do not pull directly on the cable. 

      Powering ON/OFF the Control Box

      Connect the power supply and press the power button on the Control Box to turn on/off. 

      ls_600c_pro_II_powering_on_and_off
      Default Light Mode Control Screen (CCT Mode)

      1. Intensity
      2. Correlated Color Temperature
      3. Green/Magenta Adjustment

      If your fixture has Studio Mode "ON", the Control Box will power on whenever power is supplied to it. 

      Status Indicator Icons

      Fan mode ls_600c_pro_II_silent Receiving CRMX Data ls_600c_pro_II_receiving_crmx_data
      ls_600c_pro_II_high No CRMX/DMX Data ls_600c_pro_II_no_crmx_dmx_data
      ls_600c_pro_II_medium CRMX Linked/NO Connection ls_600c_pro_II_crmx_linked_no_connection
      ls_600c_pro_II_smart Network Control Protocol Present ls_600c_pro_II_network_control_protocol_present
      Dimming Curve: Linear ls_600c_pro_II_linear AC Power Detected ls_600c_pro_II_ac_power_detected
      Dimming Curve: S-Curve ls_600c_pro_II_s_curve DC Power Supply ls_600c_pro_II_dc_power_supply
      Dimming Curve: Exp ls_600c_pro_II_exp Lithium Battery Power Supply ls_600c_pro_II_lithium_battery_power_supply
      Dimming Curve: Log ls_600c_pro_II_log Low Battery Power ls_600c_pro_II_low_battery_power
      Sidus Bluetooth ls_600c_pro_II_bluetooth