🦺Safety & Certifications
      Back to home
      1. Help Center
      2. Light Storm 600c Pro II
      3. 🦺Safety & Certifications

      [LS 600c Pro II] Safety

      LS 600c Pro II Safety

      IMPORTANT SAFETY INSTRUCTIONS

      When using this unit, basic safety precautions should always be followed, including the following:

      1. Read and understand all instructions before using.
      2. Close supervision is necessary when any fixture is used by or near children. Do not leave the fixture unattended while in use.
      3. Care must be taken as burns can occur from touching hot surfaces.
      4. Do not operate the fixture if a cord is damaged, or if the fixture has been dropped or damaged, until it has been examined by qualified service personnel.
      5. Position any power cables such that they will not be tripped over, pulled, or put into contact with hot surfaces.
      6. If an extension cord is necessary, a cord with an amperage rating at least equal to that of the fixture should be used. Cords rated for less amperage than the fixture may overheat.

      7. Always unplug the lighting fixture from the electrical outlet before cleaning and servicing, or when not in use. Never yank the cord to remove the plug from the outlet.

      8. Let the lighting fixture cool completely before storing. Unplug the power cable from lighting fixture before storing and store the cable at assigned space of the carrying case.

      9. To reduce the risk of electric shock, do not immerse this fixture in water or any other liquids.

      10.To reduce the risk of/ire or electric shock, do not disassemble this fixture. Contact cs@aputure.com or take the lighting fixture to qualified service personnel when service or repair is required. Incorrect reassembly may cause electric shock when the lighting fixture is in use.

      11.The use of any accessory attachment not recommended by the manufacturer may increase the risk of fire, electric shock, or injury to any persons operating the fixture.

      12. Please power this fixture by connecting it to a grounded outlet.

      13. Please remove the protective cover before use.

      14. Please remove the protection cover before using the reflector.

      15. Please do not block the ventilation or do not look at the LED light source directly when it is powered on. Please do not touch the LED light source in any condition.

      DO NOT TOUCH LED Light Source Surface

      16. Please do not place the LED lighting fixture near any flammable object.
      17. Only use a dry microfiber cloth to clean the product.
      18. Please do not use the light fixture in wet condition on account of electric shock may be caused.
      19. Please have the product checked by an authorized service personnel agent if the product has a problem. Any malfunctions caused by unauthorized disassembly are not covered by the warranty. The user may pay for maintenance.

      20. We recommend only using the original Aputure cable accessories. Please note that any malfunctions casued by using unauthorized accessories are not covered by the warranty. The user may pay for maintenance.

      21. When hanging the product overhead, always ensure an extra safety measure has been attached - such as a safety chain- that is certified for the weight of the product.

      22. This product is certified by RoHS, CE, KC, PSE, and FCC. Please operate the product in full compliance with relevant country's standards. Any malfunctions caused by incorrect use are not covered by warranty. The user may pay for maintenance.

      23. The instructions and information in this manual are based on thorough, controlled company testing procedures. Further notice will not be given ifthe design or specifications change.

      SAVE THESE INSTRUCTIONS

      FCC Compliance Statement

      Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

       

      This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

      If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try reorient or relocate the receiving antenna.

      • Increase the separation between the equipment and receiver.

      • Connect the equipment to an outlet on a different circuit than the receiver

        is connected to.

      • Consult the dealer or an experienced radio/TV technician for help.

      RF Warning Statement:

      This device has been evaluated to meet general RF exposure requirements.