- Help Center
- Light Storm 300x
- ⚙️Lighting Configuration & Settings
-
General Help
-
Electro Storm CS15
-
Electro Storm XT26
-
INFINIBAR
-
MT Pro
-
MC Pro
-
Nova P300c & P600c
-
Sidus One
-
Light Storm 600c Pro
-
Light Storm 1200d Pro
-
Light Storm 600x Pro
-
Light Storm 600d Pro
-
Light Storm 600d
-
Light Storm 300x
-
Light Storm 300d II
-
Light Storm 60x
-
Light Storm 60d
-
Accent B7c
-
MC
-
Sidus Link Bridge
-
amaran Flexible Lights
-
amaran Pixel Tubes
-
amaran T2c & T4c
-
amaran P60c & P60x
-
amaran 150c & 300c
-
amaran COB 60d S
-
amaran COB 60x S
-
amaran 100d S & 200d S
-
amaran 100x S & 200x S
-
amaran SM5c
-
Modifiers & Accessories
-
Electro Storm Motorized F14 Fresnel
-
Spotlight Max
-
Electro Storm Motorized Yoke
[LS 300x] FX Mode
FX Mode of LS 300x
LS 300x
Press and hold the Effects button for 2 seconds to activate Lighting FX mode, then
short press the Effects button to toggle between Paparazzi, Fireworks, Faulty Bulb,
Lightning, TV, Pulsing, Strobe, Explosion, Fire, etc.
Paparazzi Effect |
Fireworks Effect |
Faulty Bulb Effect |
Lightning Effect |
As of writing this the Fireworks effect worked in a CCT range presets include three choices of 3200K/5600K/Random.
When controlling the lightning effect, short press the Trigger button to single trigger the lighting effect; long press the Trigger button to enter the Lightning Cycle Mode.
TV Effect |
Pulsing Effect |
Strobe Effect |
Explosion Effect |
Fire Effect |
As of writing this the TV effect worked in CCT range presets and you cannot set a fixed base CCT.
When controlling the explosion effect, short press the Trigger button to single trigger the lighting effect.
As of writing this the Fire effect worked in CCT range presets and you cannot set a fixed base CCT.
When in Lighting FX mode, short press the "Intensity" button to enter Intensity Adjustment Mode. Then rotate the Brightness Control Wheel to adjust the intensity from 10%-100% as displayed on the screen.
When in Lighting FX mode, short press the "Frequency" button to enter Frequency Adjustment Mode. Then rotate the Brightness Control Wheel to adjust the frequency of the effect from 1 to 10 and R (Random) as displayed on the screen.
When in Lighting FX mode, rotate the CCT Control Wheel to adjust the base CCT of the lighting effect from 2700K to 6500K as displayed on the screen.
As of writing, you cannot set a fixed base CCT for certain effects, such as: Fireworks, TV, and Fire.
If the light is powered off, upon turning on again, the light will resume its last saved setting.