🚥Operation
      Back to home
      1. Help Center
      2. Light Storm 600d Pro
      3. 🚥Operation

      [LS 600d Pro] System Menu

      System Menu of LS 600d Pro

      Press the MENU button to enter the System Menu interface. In the System Menu you'll find Battery Power Options, DMX Mode, Dimming Curves, Fan Mode, Studio Mode, Control System, Language, Update, and Effects. 

      1. DMX Mode

      Press the Menu button to enter the System Menu. Rotate the Control Knob to select DMX Mode, and short press the knob to enter DMX Mode. 

      In DMX Mode you can enter the DMX Address menu to select the DMX address the LS 600d Pro will be set to. 

      When DMX Loss Behavior is ON, the light will memorize the state before disconnecting DMX. 

      When DMX Loss Behavior is OFF, the light will restore to the state before entering the DMX mode if disconnecting DMX. 

      ls_600d_pro_dmx_mode

      2. Dimming Curves

      Press the Menu button to enter the System Menu. Rotate the Control Knob to select Dimming Curves and short press the knob to enter the Dimming Curves selection menu. Rotate the Control Knob to choose between the four dimming curve options: Exponential (Exp), Logarithmic (Log), S-Curve, and Linear. 

      ls_600d_pro_dimming_curves3. Fan Mode

      Press the Menu button to enter the System Menu. Rotate the Control Knob to select Fan Mode, and short press the knob to enter Fan Mode.You can then short press the Control Knob to toggle the Fan Mode ON or OFF. When the Fan Mode is ON, then the fans in the fixture will spin continuously. If the Fan Mode is OFF, the fixture will automatically shut down for protection when the internal temperature of the fixture reaches the Cooling Threshold. 

      ls_600d_pro_fan_mode

      4. Studio Mode

      Press the Menu button to enter the System Menu. Rotate the Control Knob to select Studio Mode, and short press the knob to enter Studio Mode. You can then short press the Control Knob to toggle the Studio Mode ON of OFF. When Studio Mode is ON, the light will turn on as soon as it receives power. When Studio Mode is OFF, the power button must be pressed to turn on the light.  

      ls_600d_pro_studio_mode5. Control System

      The LS 600d Pro has four remote control methods available aside from on-board control: Bluetooth, 2.4G, LumenRadio, and Art-Net. Only one remote control mode can be used at a time. 

      ls_600d_pro_control_system5.1 Bluetooth

      1) In the Control System Menu, use the Control Knob to select Bluetooth to activate Sidus Mesh control. Use the Control Knob to select your desired action. Short press the Control Knob while selecting Bluetooth to toggle the Bluetooth connection ON/OFF. Enter the Bluetooth Reset Menu to start the Bluetooth Pairing process for the light. Select YES to begin the Pairing Process or NO to return to the previous menu.  

      ls_600d_pro_bluetooth2) After resetting the light's Bluetooth connection, your mobile phone or tablet will be able to connect to and control the light using the Sidus Link App. If the Bluetooth Reset Fails, a [Reset Failed] screen will appear, and the light will return to Bluetooth mode after 2 seconds. 

      5.2 2.4G Control

      In the Control System Menu, use the Control Knob to select 2.4G Control to activate 2.4G RF FSK Remote Control. Use the Control Knob to select your desired action. Short press the Control Knob while selecting 2.4G to toggle the 2.4 RF connection ON/OFF. Use the Control Knob to select the desired Channel and Group for the fixture. These RF settings correspond to the available buttons on the included remote. 

      ls_600d_pro_2.4g_control

      5.3 LumenRadio

      In the Control System Menu, use the Control Knob to select LumenRadio to activate Wireless DMX Control. Use the Control Knob to select your desired action. Short press the Control Knob while selecting LumenRadio to toggle the LumenRadio connection ON/OFF. Use the Control Knob to activate the Pairing or Firmware Update functions. 

      ls_600d_pro_lumenradio5.4 Art-Net

      In the Control System Menu, use the Control Knob to select Ethernet to activate Art-Net control. In the Ethernet Mode you can manually set the desired IP address or obtain an Automatic IP address. This mode allows you to view the Local IP, Remote IP, Gateway, and MAC Address information. 

      ls_600d_pro_art_net6. Language

      Press the Menu button to enter the System Menu. Rotate the Control Knob to select Language, and short press the knob to enter Language Selection Mode. Use the Control Knob to select from available languages. Initial languages include English and Simplified Chinese. 

      ls_600d_pro_language7. Update

      Press the Menu button to enter the System Menu. Rotate the Control Knob to select Update, and short press the knob to enter Update Mode. In Update Mode you can select Update Firmware or Firmware Version using the Control Knob. 

      By selecting Update Firmware, you can update the fixtures existing firmware, by inserting a compatible USB drive, formatted to Fat16/32, with the new firmware files. 

      By selecting Firmware Version, you can view your current firmware version, and when that firmware was created. 

      You can also update the device's firmware using the OTA firmware update function built into Sidus Link. 

      ls_600d_pro_update