- Help Center
- Light Storm 60d
- 🚥Operation
-
General Help
-
Electro Storm CS15
-
Electro Storm XT26
-
INFINIBAR
-
MT Pro
-
MC Pro
-
Nova P300c & P600c
-
Sidus One
-
Light Storm 600c Pro
-
Light Storm 1200d Pro
-
Light Storm 600x Pro
-
Light Storm 600d Pro
-
Light Storm 600d
-
Light Storm 300x
-
Light Storm 300d II
-
Light Storm 60x
-
Light Storm 60d
-
Accent B7c
-
MC
-
Sidus Link Bridge
-
amaran Flexible Lights
-
amaran Pixel Tubes
-
amaran T2c & T4c
-
amaran P60c & P60x
-
amaran 150c & 300c
-
amaran COB 60d S
-
amaran COB 60x S
-
amaran 100d S & 200d S
-
amaran 100x S & 200x S
-
amaran SM5c
-
Modifiers & Accessories
-
Electro Storm Motorized F14 Fresnel
-
Spotlight Max
-
Electro Storm Motorized Yoke
[LS 60d] Getting Started
LS 60d Getting Started
1. Power on, the switch button can control the switching state of the Lamp Head.
2. Manual Control
1) Rotate CCT adjusting knob to adjust CCT, clockwise to change the cool color, counterclockwise to change the warm color. Stepless adjustment can be realized.
2) Click the MENU key to enter the MENU interface, as shown below. Rotate the "MENU" key to select MENU options, and click the "MENU" key to enter the selected MENU items. To exit the MENU interface, click the "MENU" key and select "exit" to return to the CCT interface.
3. CCT Mode
Select "CCT" from the menu interface and enter THE CCT mode. Rotate the "OK" key
to adjust the INT.
4) FX Mode
Select "FX Mode" from the menu interface. Rotate and click "OK" to enter different FX modes.
a. Paparazzi Mode |
b. Fireworks Mode |
c. Faulty bulb Mode
|
d. Lightning Mode In lightning mode, short press the “OK” button to single trigger the light effect, long press the “OK” button to enter the cycle mode.
|
e. TV Mode |
f. Pulsing Mode |
d. Strobe Mode
|
h. Explosion Mode In explosion mode, short press the Trigger button to single trigger the light effect The adjustable frequency of explosion mode is 1-10. |
Rotate the MENU key to select "INT, frequency", and then rotate the "OK" knob to adjust the brightness value (10% ~ 100%), and frequency [1-10, R (random)].
If the light is powered off, upon turning on again, the light resumes its last saved setting.
In FX mode, click "MENU" to return to the light effects MENU interface. At this point, rotate "OK" to switch to different light effects. Click "MENU" again to return to the main MENU interface.
At this time, the selected FX mode is still maintained. You can choose different options according to your needs, and select "CCT" to exit FX mode.
5) Wireless mode
Users can connect devices with the name LS 60d ****** through the bluetooth of their mobile phones or tablets (six digits + letters are the serial number of the machine). At this time, they can control the devices wirelessly through their mobile phones or tablets.
Through the menu interface, select "Device serial number" to view the serial number of the device.
6) Dimming curve mode
Press “MENU” key to enter MENU mode, rotate “MENU” key to select "Dimming curve" item, click “MENU” key to enter "Dimming curve" mode, rotate "OK" key to select exponential, logarithmic, linear and "S" dimming curve, and then click "OK" key to confirm the selection.
7) Studio mode
Press “MENU” key to enter the MENU mode, rotate “MENU” key to select studio mode, click “MENU” key to enter studio mode, then rotate "OK" key to select "Yes" or "No", and click "OK" key to open or close studio mode.
When Studio Mode is active, the light will turn on as soon as it receives power, without having to press the power button.
Studio Mode is active as the factory default
8) Bluetooth Reset
(1) Press “MENU” key to enter MENU mode, rotate “MENU” key to select Bluetooth reset, click “MENU” key to enter Bluetooth Reset mode, then rotate “OK” key to select "Yes" and press “OK” key short to reset Bluetooth (the current reset progress will be displayed on the pop-up interface, and the progress will be displayed within 5 seconds); Select "NO" to return to the previous menu.
(2) After resetting the light's Bluetooth connection, your mobile phone or tablet will be able to connect to and control the LS 60d.
(3) If the Bluetooth Reset fails, a [Reset Failed] screen will pop-up, and the light will return to Bluetooth mode after 2 seconds.
The light must be connected to your mobile device using the Sidus Link mobile application, and not via your device's typical Bluetooth connection menu.
9) Language
Press “MENU” key to enter MENU mode, rotate “MENU” key to select Language, click “MENU” key to enter Language MENU, rotate “OK” key to select English or Chinese, and then click “OK “key to confirm the selection.
The factory default language is English.
10) Firmware Version
Press the “MENU” key to enter the MENU mode, rotate the “MENU” key to select the firmware version number, click the key to enter the "Firmware version Number" interface, and then you can see the version information of the firmware.
11) OTA Mode
Firmware updates can be updated online via the Sidus Link app for OTA updates.
3. Focusing
Optical "wide Angle" and "focus" can be achieved by rotating the focusing knob, clockwise rotation of the focusing knob to achieve "focus", counterclockwise rotation of the focusing knob to achieve "wide Angle".
4. Using the Sidus Link APP
You can download the Sidus Link app from the iOS App Store or Google Play Store for enhancing the functionality of the light. Please visit sidus.link/app/help for more details regarding how to use the app to control your Aputure lights.