🦺Safety & Certifications
      Back to home
      1. Help Center
      2. Light Storm 60x
      3. 🦺Safety & Certifications

      [LS 60x] Safety

      LS 60x Safety

      Important Safety Instructions

      When using this unit, basic safety precautions should always be followed, including the following:

      1. Read and understand all instructions before using.
      2. Close supervision is necessary when any fixture is used by or near children. Do not leave fixture unattended while in use.
      3. Care must be taken as burns can occur from touching hot surface.
      4. Do not operate the fixture if a cord is damaged or if the fixture has been dropped or damaged - until it has been examined by qualified service personnel.
      5. Position any power cables such that they will not be tripped over, pulled, or put into contact with hot surfaces.
      6. If an extension cord is necessary, a cord with an amperage rating at least equal to that of the fixture should be used. Cords rated for less amperage than the fixture may overheat. 
      7. Always unplug the lighting fixture from the electrical outlet before cleaning and servicing, or when not in use. Never yank the cord to remove the plug from the outlet. 
      8. Let the lighting fixture cool completely before storing.
      9. To reduce the risk of electric shock, do not immerse this fixture in water or any other liquids.
      10. To reduce the risk of fire or electric shock, do not disassemble this fixture. Contact Aputure Customer Service or take it to qualified service personnel when service or repair work is required. Incorrect reassembly may cause electric shock when the lighting fixture is in use.
      11. The use of an accessory attachment not recommended by the manufacturer may increase the risk of fire, electric shock, or injury to any persons operating the fixture. 
      12. Power this fixture by connecting it to a grounded outlet.
      13. Please remove the protective film from the optical lens before use.
      14. Please do not block the ventilation and do not look at the light directly when it is powered on.
      15. Please do not place the LED lighting fixture near any liquids or other flammable objects.
      16.  Only use a dry microfiber cloth to clean the product. 
      17. Please have the product checked by authorized service personnel agent if your product has a problem.
      18. The malfunctions caused by unauthorized disassemble are not covered under the warranty. 
      19. We recommend only using the original Aputure cable Please note that our warranty for this product does not apply to any repairs required due to any malfunc­tions of unauthorized Aputure accessories, although you may request such repairs for a fee.
      20. This product is certified by RoHS, CE, KC, PSE, and FCC. Please operate the product in full compliance with the operation standards. Please note that this warranty does not apply to repairs arising from malfunctions, although you may request such repairs on a chargeable basis.
      21. The instructions and information in this manual are based on thorough, controlled company testing procedures. Further notice will not be given if the design or specifica­tions change.

      SAVE THESE INSTRUCTIONS

      FCC Compliance Statement

      This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.

      Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

      NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try reorient or relocate the receiving antenna.

      •  Increase the separation between the equipment and receiver.
      • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
      • Consult the dealer or an experienced radio/TV technician for help.

      RF Warning Statement: This device has been evaluated to meet general RF exposure requirements.