🚥Operation

[Motorized Yoke] Attaching the CS15/XT26 to the Motorized Yoke

Attaching the CS15/XT26 to the Motorized Yoke

Motorized Yoke Orientation Settings

Press and hold the "Reset" button for 1 second to activate the "Reset" indicator light. Once activated, the "Reset" button now actively changes the settings on the Motorized Yoke. 

motorized_yoke_orientation_settings_step_1

Switching the Pitch Origin

1. Pitch origin: origin A: 0° (default), origin B: -180°;

2. Once the "Reset" button is activated, press and hold the button for 3 seconds to switch to origin of the Electrical Contacts bracket between origin "A" and origin "B". 

motorized_yoke_switching_the_pitch_origin_step_1

Reset

Press and hold the button for 3 seconds to reset the position of lamp head in the Motorized Yoke to 90°. If the button is held after the head is at 90°, it will reset to -90°. 

The Motorized Yoke has an internal battery to allow for setup before power is supplied to the Yoke.