💡Overview
      Back to home
      1. Help Center
      2. Nova P300c & P600c
      3. 💡Overview

      [NovaP300c-NovaP600c] Fixture Details & Buttons

      Nova P300c & Nova P600c Buttons & Fixture Details

      P300c

      nova_p300c_light-1

      1. Accessory Slot
      2. Fixed Diffusion Panel
      3. Disk Brake Handle
      4. Yoke
      5. T-Handle / Baby Pin Mounting Screw
      6. Dual Junior/Baby Pin Small text underneath: (1-1/18in. / 28mm | 5/8in / 16mm)
      7. T-Handle Storage Hole
      8. Cable Relief Hook
      9. Quick-Release "Lightning Clamp" Receiver
      10. Carrying Handle/Floor Stand
      11. Control Box Input Smaller Text: (5-pin Male XLR)
      12. Battery Input Smaller text: (3-Pin Male XLR)
      13. Neutrik® powerCON AC Power Input

      Controller Box Detail

      1. nova_300c_controller_boxCCT / Hue / Secondary Control Knob
      2. USB Port
      3. Preset Buttons
      4. Menu Button
      5. Light Mode Button
      6. Green-Magenta / Saturation / Tertiary Control Knob
      7. Intensity / Main Control Knob
      8. OLED Display
      9. Paracord Strap Plate
      10. Power Button
      11. "Lightning Clamp" Quick-Release Plate

      P600c

      nova_p600c_light-1

      1. Accessory Slot
      2. Fixed Diffusion Panel
      3. Disk Brake Handle
      4. Yoke
      5. Lamp Support Column
      6. T-Handle Storage Hole
      7. Pogo Pin
      8. Carrying Handle
      9. Quick Release
      10. Control Box Input (5-Pin Male XLR)
      11. Battery Input (3-Pin Male XLR)

      12. Neutrik® power CON AC Power Input

      Controller Box Detail

      nova_p600c_controller_box_details

      1. CCT / Hue Wheel
      2. USB Port
      3. Preset Buttons
      4. Menu Button
      5. Light Mode Button
      6. Green-Magenta / SAT Wheel
      7. Intensity/Main Control Knob
      8. OLED Display
      9. Paracord Strap Plate
      10. Electrical contacts
      11. Quick- Release Plate
      12. Power Button

       * "Electrical Contacts" on P600c only

      nova_p600c_controller_box_details-2

      1. 5-Pin Female XLR Control Box Input
      2. DMX IN Port
      3. DMX OUT Port

      "5-Pin Female XLR Control Box Input" connects the lamp head to the (red colored) Control Box Input port only.  

      Fixture Presets

      There are 4 Preset Buttons on the Control Box. After setting the light to the desired output mode, long press any one of the four buttons 1, 2, 3, 4 to start the process of saving the preset, and use the INT knob to select "Yes/No". Then, you can use these preset buttons in while in any mode to activate the preset mode and content previously saved to the preset.

      Screen Shot 2023-07-11 at 11.02.27 AM

      Presets will change the Manual Mode to whichever mode you used to store the preset.