[NovaP300c-NovaP600c] Wired DMX Control

Wired DMX & DMX Settings for Nova P300c & Nova P600c

Wired DMX control is accessed through the Control Box. It has DMX 5 Pin in Male and DMX 5pin out Female for DMX pass through.

Lighting Console Control Box Control Box Control Box

Screen Shot 2023-07-10 at 4.48.15 PM

Press the MENU Button to enter the menu interface.

Rotate the Wheel and short press to enter the DMX Settings.

Rotate the Wheel to select and then short press the wheel to confirm the selection.

DMX Address: Rotate the wheel to change the DMX channel (001-512). Press and hold to lock the screen on the DMX Address for DMX Control.

To use the Nova series on DMX, the menu must be on the "DMX address." To keep this screen active, press and hold the wheel to lock it.

DMX Profiles: Rotate the wheel to select the DMX Profile.

DMX Loss Behavior: Rotate the INT knob to select Black out /fade to Black /Hold last setting/ Hold 2 min& fade Out.

Black out -when the DMX signal is lost, it will be Black out.
Fade to Black -after DMX signal is lost, it will fade to Black in 60 seconds.
Hold last setting -After DMX signal is lost, remember the last control setting. 4)Hold 2 min& Fade Out -After the DMX signal is lost, keep the last control setting for two minutes, and then Fade to Black within 60 seconds.

* If the signal is reconnected, the DMX console will continue to maintain the signal
output as same as before.

* The fade-out time decreases as the percentage of brightness decreases. When the
brightness output is 100%, the fade-out time is 60 seconds, which decreases in
sequence

Screen Shot 2023-07-10 at 5.14.50 PM