- Help Center
- Nova P300c & P600c
- 🎛️Control Options
-
General Help
-
Electro Storm CS15
-
Electro Storm XT26
-
INFINIBAR
-
MT Pro
-
MC Pro
-
Nova P300c & P600c
-
Sidus One
-
Light Storm 600c Pro
-
Light Storm 1200d Pro
-
Light Storm 600x Pro
-
Light Storm 600d Pro
-
Light Storm 600d
-
Light Storm 300x
-
Light Storm 300d II
-
Light Storm 60x
-
Light Storm 60d
-
Accent B7c
-
MC
-
Sidus Link Bridge
-
amaran Flexible Lights
-
amaran Pixel Tubes
-
amaran T2c & T4c
-
amaran P60c & P60x
-
amaran 150c & 300c
-
amaran COB 60d S
-
amaran COB 60x S
-
amaran 100d S & 200d S
-
amaran 100x S & 200x S
-
amaran SM5c
-
Modifiers & Accessories
-
Electro Storm Motorized F14 Fresnel
-
Spotlight Max
-
Electro Storm Motorized Yoke
[NovaP300c-NovaP600c] Wireless DMX Control (CRMX)
Nova P600c Wireless DMX Control (CRMX)
Press the MENU button to enter the menu interface; rotate the INT Wheel to select "CRMX Settings" and press enter to open the Wireless DMX interface.
CRMX Status: Short press the INT wheel to turn ON or OFF the LumenRadio module.
Linking: Connect with the LumenRadio transmitter module when the LumenRadio module is turned on.
Exit: Short press to Exit return to the main menu.
*Wireless DMX built in to the Nova P600c only. The Nova P300c requires an external CRMX Rx for wireless capabilities while utilizing the Wired DMX Settings.
LINKING
Press the Select Wheel to select CRMX Settings.
If the CRMX chip of your fixture has never been linked with a CRMX Transmitter before, then use the Select Wheel to select "ON" within the CRMX Settings Screen; this will allow the fixture to search for a link signal from a Transmitter.
Press the Link Button of the Transmitter you want the P600c linked with.
If your fixture was previously linked to an undesired Transmitter, select "Unpair" first to allow the CRMX chip to listen for a new Tx link. The screen performs an "Unpairing" animation while it unlinks from its previous Tx.
When you press the Link button on your Transmitter, your Nova P600c screen will not show a "Pairing" animation screen.
For the fixture to listen to DMX data, the fixture must have the "DMX Settings" screen displayed.
UNLINKING
Selecting "Unpair" in the CRMX Settings will disconnect the currently established connection so that another Transmitter's signal can be linked.
If BT Settings (Sidus Mesh BT) is enabled ("ON"), then CRMX is disabled ("OFF") automatically. If CRMX is enabled ("ON"), the BT Settings (Sidus Mesh BT) are disabled ("OFF") automatically.