🚥Operation
      Back to home
      1. Help Center
      2. amaran SM5c
      3. 🚥Operation

      [amaran SM5c] Installing the Strip Light

      Setting up the SM5c

      Installation

      1. Choose a dry, clean, and smooth surface to install the strip light.

      sm5c_dry_clean_surface

      Do not install strip light on surfaces such as fabric, dusty walls, rough plastic, and frosted glass.

      2. Clean the mounting surface with the included cleaning kit.

      sm5c_clean

      3. When the ambient temperature is lower than 10℃/50℉, please use a hair dryer to heat it before installation to achieve the best adhesive effect.

      sm5c_hair_dryer

      4. After confirming the installation position, remove the dust proof paper tape from the double-sided tape on the back of the strip light, and mount the strip light to your chosen surface.

      sm5c_paper_tape

      5. After the strip light is installed, use the included double-sided tape to reinforce any corners or areas where the adhesive is not strong.

      sm5c_double_sided

      1. Double-sided tape                                 2. Strip light

      6. After arranging the LED controller and wires to the desired position, fix them with double-sided tape.