- Help Center
- amaran Flexible Lights
- ⚙️Lighting Configuration & Settings
-
General Help
-
Electro Storm CS15
-
Electro Storm XT26
-
INFINIBAR
-
MT Pro
-
MC Pro
-
Nova P300c & P600c
-
Sidus One
-
Light Storm 600c Pro
-
Light Storm 1200d Pro
-
Light Storm 600x Pro
-
Light Storm 600d Pro
-
Light Storm 600d
-
Light Storm 300x
-
Light Storm 300d II
-
Light Storm 60x
-
Light Storm 60d
-
Accent B7c
-
MC
-
Sidus Link Bridge
-
amaran Flexible Lights
-
amaran Pixel Tubes
-
amaran T2c & T4c
-
amaran P60c & P60x
-
amaran 150c & 300c
-
amaran COB 60d S
-
amaran COB 60x S
-
amaran 100d S & 200d S
-
amaran 100x S & 200x S
-
amaran SM5c
-
Modifiers & Accessories
-
Electro Storm Motorized F14 Fresnel
-
Spotlight Max
-
Electro Storm Motorized Yoke
[amaran F21x F22x F21c F22c] Light Configuration & Settings
amaran F21x F22x F21c F22c Light Configuration & Settings
Menu
Press the MENU button to navigate to the Root Menu. While on the Root Menu screen, rotate the INT Button and press the INT button to select between:
Frequency Selection
Press the MENU button to enter the menu interface. Rotate the INT Wheel to select and press to enter the Frequency Selection interface. Rotate the INT Wheel to adjust the light frequency by ±100Hz every turn.
Dimming Curve
Press the MENU button to enter the menu interface, rotate the INT wheel to select Dimming Curve, and press the INT wheel to enter the Dimming Curve selection menu. Using the INT wheel to choose from exponential (Exp), logarithmic (Log), S-Curve, or linear dimming curves, press the INT wheel to confirm the selection.
BT Reset
Press the MENU button to enter the menu interface. Rotate the INT Wheel to select and press "BT Reset" to enter the Bluetooth interface.
BT Reset: Turn and press the INT Wheel to reset (YES) or cancel (NO).
"Bluetooth" refers to the Sidus Link Mesh Bluetooth.
Bluetooth control and CRMX Control cannot be active at the same time.
If BT Settings (Sidus Link Mesh BT) is enabled ("ON"), then CRMX will be disabled automatically ("OFF").
If CRMX is enabled ("ON"), then BT Settings (Sidus Link Mesh BT) will be disabled automatically ("OFF").
BT Serial No.
Rotate the INT Wheel to select the BT Serial No. and press the INT Knob to enter the BT Serial No. display to see the Bluetooth serial number.
Studio Mode
Press the MENU button to enter the menu interface. Rotate the INT Wheel and press to enter the Studio Mode interface. Then, rotate the INT Wheel to turn the Studio Mode on (YES) or off (NO).
When the Studio Mode is "ON", the fixture will automatically power on as soon as it detects AC Power.
When the Studio Mode is "OFF", the fixture will power on only when the power button is pressed.
If your fixtures are rigged on a grid, or other hard-to-reach places, turning on Studio Mode can make it easier to manage the lights. The lights will then turn on the moment they detect AC power, allowing the user to easily them on via a light switch or breaker without having to reach each control box independently.
Language
Press the MENU button to enter the menu interface. Rotate the INT Wheel to select and press to enter the Language interface. You can rotate the INT wheel to select between English and Chinese. Press the INT Wheel to confirm the selection.
Firmware Version
Rotate the INT Knob and press to select the Firmware Version display. Press the INT Knob again to return to the Menu.
Update Firmware
Press the MENU button to enter the menu interface. Rotate the INT Wheel to select "Update Firmware" and then select "YES" or "NO".
If a USB flash drive containing a firmware update is mounted in the USB port (located on the side of the Control Box), the screen will display an update progress. If you choose “NO”, then it will return the menu interface.
The Firmware File should be an unzipped ".bin" file on the root of your USB-C flash drive.
Firmware updates can also be done via the Sidus Link app using OTA (Over-The-Air Technology).
Factory Reset
Press the MENU button to enter the menu interface, rotate the INT wheel to select, and press it to enter the Factory Reset interface.
The factory default settings are:
Intensity: 50%
Frequency Selection: +0Hz
CCT: 5500K
Output Mode: Constant Output
Studio Mode: OFF
Dimming Curve: Linear
DMX channel number: 001
Language: English
FX: Fireworks; Frequency: 5
Fixture Presets ("c" Series only)
There are 4 preset buttons located on the bottom row of the control box. Once you have set your light to the desired output, long press and hold one of the four buttons (1, 2, 3, or 4) to start the Save Preset procedure. Use the INT Wheel to select "YES" or "NO". You can use the preset buttons in any Lighting Mode and it will activate the Lighting Mode and settings previously saved to that preset. You can save a nearly infinite number of presets using the Sidus Link mobile app.
Exit
Pressing the INT Wheel to exit leaves the root menu and returns the Control Box to the currently chosen Light Mode display.