ğŸŽ®DMX Profiles

[amaran Pixel Tubes] DMX Profiles & Settings

DMX Charts for the amaran PT1c PT2c PT4c Pixel Tube


amaran Pixel Tube:

amaran PT1c PT2c PT4c Pixel Tube DMX Profiles v1.0
Downloadable Lighting Console Profiles - grandMA, EOS, Hog4


DMX Settings

Press the Up/ Down buttons and press the OK button to select DMX Settings in system menu.
Press the Up/ Down buttons to select DMX Settings.
DMX Address : Set the DMX address of amaran PT, press and hold the OK button for 2 seconds to lock / unlock the DMX address (To prevent accidental touch to exit DMX mode).
DMX Profiles: Press the Up/ Down buttons to choose DMX profile.
DMX Loss Behavior:

1. Hold Last Setting : After DMX signal is lost, remember the last control setting. 2. Black Out : When the DMX signal is lost, it will be Black out .
3. Fade To Black : After DMX signal is lost, it will fade to Black in 60 seconds.

4. After the DMX signal is lost, keep the last control setting for two minutes, and then Fade to Black within 60 seconds.

Note: The fade-out time decreases as the percentage of brightness decreases. When the brightness output is 100%, the fade-out time is 60 seconds, which decreases in sequence.

Note: If the signal is reconnected, the DMX console will continue to maintain the signal output as same as before.

Screen Shot 2023-07-10 at 1.17.15 PM

DMX Address Screen must be visible for Hard Line DMX to control the fixture.