- Help Center
- INFINIBAR
- 🎮DMX Profiles
-
General Help
-
Electro Storm CS15
-
Electro Storm XT26
-
INFINIBAR
-
MT Pro
-
MC Pro
-
Nova P300c & P600c
-
Sidus One
-
Light Storm 600c Pro
-
Light Storm 1200d Pro
-
Light Storm 600x Pro
-
Light Storm 600d Pro
-
Light Storm 600d
-
Light Storm 300x
-
Light Storm 300d II
-
Light Storm 60x
-
Light Storm 60d
-
Accent B7c
-
MC
-
Sidus Link Bridge
-
amaran Flexible Lights
-
amaran Pixel Tubes
-
amaran T2c & T4c
-
amaran P60c & P60x
-
amaran 150c & 300c
-
amaran COB 60d S
-
amaran COB 60x S
-
amaran 100d S & 200d S
-
amaran 100x S & 200x S
-
amaran SM5c
-
Modifiers & Accessories
-
Electro Storm Motorized F14 Fresnel
-
Spotlight Max
-
Electro Storm Motorized Yoke
[INFINIBAR] DMX Profiles & Settings
INFINIBAR DMX Chart & Settings
DMX Profiles
Downloadable Lighting Console Profiles - grandMA, EOS, Hog4
DMX Settings
Press MENU to access the system menu, rotate and press the control wheel to select DMX
Setting.
DMX Address: Choose the DMX address of INFINIBAR, press and hold the control wheel for 2 seconds to lock/unlock the DMX address (Prevent accidental touch to exit DMX mode)
DMX Profiles: Rotate the control wheel and press to choose DMX profile. DMX Loss Behavior:
1.Hold Last Setting: After DMX signal is lost, remember the last control setting
2.Black Out: when the DMX signal is lost, it will Black Out
3.Fade To Black: after DMX signal is lost, it will fade to Black in 60 seconds
4.Hold 2min & Fade Out: After the DMX signal is lost, keep the last control setting for two minutes, and then Fade to Black within 60 seconds
*The fade-out time decreases as the percentage of brightness decreases. When the brightness output is 100%, the fade-out time is 60 seconds, which decreases in sequence.
* If the signal is reconnected, the DMX console will continue to maintain the signal output as same as before.
For the fixture to listen to DMX data, the fixture must have the "DMX Settings" screen displayed.
DMX Smoothing (V1.7 and later)
Off
Smooth
Super Smoothe