🎮DMX Profiles
      Back to home
      1. Help Center
      2. Light Storm 1200d Pro
      3. 🎮DMX Profiles

      [LS 1200d Pro] DMX Profiles and Settings

      LS 1200d Pro DMX Profiles and Settings

      DMX Profiles

      LS 1200d Pro DMX Profile Specification v1.0

      Downloadable Lighting Console Profiles - grandMA, EOS, Hog4

      DMX Mode

      Press the MENU Button to enter the menu interface, rotate the Select Wheel and short press to enter the DMX mode.

      DMX Address: Rotate the Select Wheel to set the DMX Address.
      DMX Loss Behavior: Use the Select button to select Black out /fade to Black /Hold last setting/ Hold 2 min& fade Out.

      1. Black out -when the DMX signal is lost, it will be Black out.
      2. Fade to Black -after DMX signal is lost, it will fade to Black in 60 seconds.
      3. Hold last setting -After DMX signal is lost, remember the last control setting.
      4. Hold 2 min& Fade Out -After the DMX signal is lost, keep the last control setting for two minutes, and then Fade to Black within 60 seconds.

      DMX Profile: Rotate the Select Wheel and press to select Lighting / Effect /Lighting& Effects 8-bit or 16-bit.

      DMX Termination: toggle Auto-termination on or off.

      Screen Shot 2023-07-11 at 5.35.48 PM

      *The fade-out time decreases as the percentage of brightness decreases. When the brightness output is 100%, the fade-out time is 60 seconds, which decreases in sequence.

      **If the signal is reconnected, the DMX console will continue to maintain the signal output as same as before.

      DMX Address Screen must be visible for Hard Line DMX or CRMX data to control the fixture.