- Help Center
- Light Storm 600d
- 🚥Operation
-
General Help
-
Electro Storm CS15
-
Electro Storm XT26
-
INFINIBAR
-
MT Pro
-
MC Pro
-
Nova P300c & P600c
-
Sidus One
-
Light Storm 600c Pro
-
Light Storm 1200d Pro
-
Light Storm 600x Pro
-
Light Storm 600d Pro
-
Light Storm 600d
-
Light Storm 300x
-
Light Storm 300d II
-
Light Storm 60x
-
Light Storm 60d
-
Accent B7c
-
MC
-
Sidus Link Bridge
-
amaran Flexible Lights
-
amaran Pixel Tubes
-
amaran T2c & T4c
-
amaran P60c & P60x
-
amaran 150c & 300c
-
amaran COB 60d S
-
amaran COB 60x S
-
amaran 100d S & 200d S
-
amaran 100x S & 200x S
-
amaran SM5c
-
Modifiers & Accessories
-
Electro Storm Motorized F14 Fresnel
-
Spotlight Max
-
Electro Storm Motorized Yoke
[LS 600d] Getting Started
Powering LS 600d and Manual Controls
Press the power button to turn the light on and off
- Brightness
- Battery Level / AC Power Symbol
- Wireless Control Mode
- Remaining Operating Time
- Dimming Curve
- Groups
- Channels
Manual Controls
1) Rotate the Knob to adjust the intensity of the light from 0-100% in 1% increments. The speed with which you turn the knob will change the rate of increase or decrease.
2) Press the MENU button to enter the System Menu interface. In the System Menu you'll find DMX Mode / Dimming Curves / Fan Mode / Studio Mode / Freq.Selection / BT Reset / BT Serial NO / Language / Update Firmware Version / UID / Factory Reset / Exit.
2.1 Dimming Curves
Press the MENU button to enter the system menu, rotate knob to select Dimming Curve, and press the MENU button again to enter the dimming curve selection menu. Using the knob to choose from exponential (Exp), logarithmic (Log), S-Curve, or linear dimming curves, and press the MENU button to make your selection.
2.2 Fan Mode
Press the MENU button to enter the system menu, rotate knob to select Fan Mode, and press the MENU button again to enter Fan Mode. Use the wheel to select between Smart, High, Medium, Silent, then press the MENU button to confirm your selection.
2.3 Studio Mode
Press the Menu button to enter the System Menu. Rotate the Knob to select Studio Mode, and short press the knob to enter Studio Mode. You can then short press the Knob to toggle the Studio Mode ON or OFF. When Studio Mode is ON, the light will turn on as soon as it receives power. When Studio Mode is OFF, the power button must be pressed to turn on the light.
2.4 Freq. Selection
Press the MENU button to enter the menu interface, rotate the Knob to select and press to enter Frequency Selection interface. Rotate the Select wheel to adjust the light frequency by 100Hz every turn.
2.5 BT Reset
Press the MENU button to enter the menu interface, rotate the Knob to select and press to enter BT Reset. Rotate the control wheel to select "YES"and short press the wheel to reset the device's Bluetooth pairing or select "NO" to return to the system menu.
After resetting the light's Bluetooth connection, your mobile phone or tablet will be able to connect to and control the light with Sidus Link App.
2.6 BT Serial NO.
Press the MENU button to enter the menu interface, rotate the Knob to select and press to view the BT Serial NO.
2.7 Language
Press the Menu button to enter the System Menu. Rotate the Knob to select Language, and short press the knob to enter Language Selection Mode. Use the Knob to select from the available languages. Initial languages include English and Simplified Chinese.
2.8 Firmware Version
Press the MENU button to enter the menu interface, rotate the Knob to select and press to view the current firmware version of lamp head and control box.
2.9 UID
Press the MENU button to enter the menu interface, rotate the Knob to select and press to view the fixture UID.
2.10 Factory Reset
Press the MENU button to enter the menu interface,rotate the INT wheel to select and press to enter the Factory Reset interface.
The factory settings are: fan is in smart mode, light brightness value is 50%, studio mode off, dimming curve-linear, DMX channel number 001,English, fireworks light effect frequency 5.