Back to home

Help Center

MC Pro

⚙️Lighting Configuration & Settings

[MC Pro] Light Configuration & Settings

MC Pro Light Configuration & Settings

Main Display

Battery time remaining Wireless connection status Battery level Screen Shot 2023-07-12 at 2.15.45 PM

Light Mode

MC Pro Manual Light Modes

Bluetooth Settings

Rotate and press the Function Control Knob to select BT Settings in system menu. Rotate and press the Function Control Knob to select BT Status/ BT Reset/ BT UID.

BT Status: Turn on/off Bluetooth.

BT Reset: Reset the MC Pro Bluetooth connection, and your BT Device (iOS or Android) will be able to connect to and control the light with the Sidus Link App.

BT UID: See the Bluetooth Unique Identifier.

Screen Shot 2023-07-12 at 3.17.27 PM

"Bluetooth" refers to Sidus Link Mesh Bluetooth.

If BT Settings (Sidus Link Mesh BT) is enabled ("ON"), then CRMX is disabled ("OFF") automatically. If CRMX is enabled ("ON"), the BT Settings (Sidus Mesh BT) are disabled ("OFF") automatically.

DMX Settings

Rotate and press the Function Control Knob to select DMX Settings in system menu.

Rotate and press the Function Control Knob to select between:

DMX Settings
CRMX Settings

DMX Settings

Rotate and press the knob to select between DMX Address/DMX Profiles/DMX Loss Behavior.

DMX Address: Choose the DMX address of MC Pro, press and hold the Function Control Knob for 2 seconds to lock/unlock the DMX address screen--this prevents unwanted changes to the fixture settings while the screen is locked.

DMX Profiles: Rotate the Function Control Knob to choose the DMX profile.

MC Pro DMX Profile Specification v1.0

DMX Loss Behavior:
1. Hold Last Settings: After DMX signal is lost, remember the last control setting.
2. Black Out: When DMX signal is lost, fixture will black out.
3. Fade To Black: After DMX signal is lost, fixture will fade to black in 60 seconds.
4. Hold 2min & Fade Out: After the DMX signal is lost, keep the last control setting for two minutes, and then fade to black within 60 seconds.

Screen Shot 2023-07-12 at 3.21.48 PM

DMX Address Screen or DMX Settings Screen must be visible for Hard Line DMX or CRMX data to have affect on the fixture.

* The fade-out time decreases as the percentage of brightness decreases. When the brightness output is 100%, the fade-out time is 60 seconds, which decreases in sequence.
* If the signal is reconnected, the DMX console will continue to maintain the signal output as same as before.

CRMX Settings

Rotate and press the Function Control Knob to select CRMX Settings in DMX Settings Menu.

CRMX Status: When CRMX Status is Enabled/ON, it will continuously search for a linkable signal in the background to connect.

Unpair: Unpair will disconnect the currently established connection so that a different transmitter can be paired.

Screen Shot 2023-07-12 at 3.25.44 PM

NOTE: The MC Pro does not show an animation while linking to a new Tx.

System Settings

Rotate and press the Function Control Knob to select System Settings in the system menu. Rotate and press the Function Control Knob to select between:

Frequency Selection
Language
Product Info
Factory Reset

Frequency Selection:

Rotate the Function Control Knob to adjust the light frequency by ±100Hz every turn.

Language:

Rotate the Function Control Knob to select between English or Simplified Chinese.

Product Info:

Rotate the Function Control Knob to select Product Info and see the Firmware Version / Hardware Version.

Factory Reset:

Rotate the Function Control Knob to select Factory Reset.

Screen Shot 2023-07-13 at 9.38.03 AM

Factory Default Settings:
Intensity: 50%

CCT: 5600K

GM: 0

BT Status: ON

DMX Address: 001

DMX Profile: CCT&RGB

DMX Loss Behavior: Hold Last Setting

CRMX: OFF.

Frequency Selection: 0Hz

Language: English