🚥Operation

[Motorized Yoke] Operating Instructions

Operating Instructions of Motorized Yoke

1. Manual Control and Setting Adjustments with the Control Box

2. DMX

The control Device is connected to the DMX port of CS15/XT26, using the corresponding DMX channel table. (DMX channel table can be downloaded from Aputure official website)

3. Enabling the Motorized Yoke for DMX Control

3.1 Motorized Accessory Extension:

When the motorized accessory profile extension is enabled, the DMX profile includes the F14 and Motorized Yoke channels. When disabled, these accessories cannot be controlled.

Motorized Accessory extension is enabled by default.

3.2 Function Configuration Extension: 

When the Function Configuration profile extension is enabled, the DMX profile includes the Fan Mode and Dimming Curve channels. 

Function Configuration extension is enabled by default. Function Configuration channels are added after Motorized Accessories channels when both extensions are enabled.  

motorized_yoke_function_configuration_extension

4. Art-Net/sACN

The control device is connected to the Ethernet port of the CS15/XT26, using the corresponding DMX channel table. (DMX channel table can be downloaded from Aputure official website)

5. CRMX

The control device is connected to the CRMX of CS15/XT26, using the corresponding DMX channel table. (DMX channel table can be downloaded from Aputure official website)

6. Sidus BT

Use Sidus Link APP to connect to the Sidus BT of CS15/XT26, and control the Motorized Yoke through the App.