[MT Pro] DMX Profiles & Settings

DMX Chart for the MT Pro

The MT Pro can be control over Wired DMX and Wireless DMX(CRMX). To individual control of all the pixels available in the MT Pro can only be accessed through external control protocols, like CRMX or DMX. This is to simplify the process of operating a compact fixture with a naturally smaller screen, as individual control over all the pixels would result in a very complex interface. For users who don’t need to access all 36 pixels at once, the MT Pro also comes programmed with a variety of DMX profiles that bundle the pixels into groups of 2, 3, 4, 6, and 9.

DMX Profiles

MT Pro DMX Profiles v1.2

Downloadable Lighting Console Profiles - grandMA, EOS, Hog4

DMX Settings

Press MENU to access the system menu. Rotate and press the Function Control Wheel to select DMX Settings.

DMX Status Screen

Displays the address, profile and battery remaining when there is an active connection. Click here for more info.

When the MT Pro is actively receiving wired or wireless DMX Data, it will display the DMX Status Screen.(Version 1.6 and later)

MTPro_DMX_Status_Screen

The DMX Status screen displays:

DMX Start Address
DMX Profile
Battery Time Remaining

DMX Address

Choose the DMX address of MT Pro, press and hold the control wheel for 2 seconds to lock/unlock the DMX address (Prevent accidental touch to exit DMX mode)

DMX Profiles

Rotate the control wheel and press to choose DMX profile. See the List of DMX Profiles Above

DMX Loss Behavior:

1. Hold Last Setting: After DMX signal is lost, remember the last control setting.

2. Black Out: when the DMX signal is lost, it will be Black out

3. Fade To Black: after DMX signal is lost, it will fade to Black in 60 seconds

4. Hold 2min & Fade Out: After the DMX signal is lost, keep the last control setting for two minutes, and then Fade to Black within 60 seconds

Screen Shot 2023-07-13 at 11.06.39 AM

[BREAK UP IMAGES ABOVE INTO SEPARATE IMAGES and insert into proper place]

* The fade-out time decreases as the percentage of brightness decreases. When the brightness output is 100%, the fade-out time is 60 seconds, which decreases in sequence.

* If the signal is reconnected, the DMX console will continue to maintain the signal output as same as before.

If you are attempting wired DMX control, be sure you are using the Aputure Active USB-C to 5-Pin DMX In & Out Adapter

If the adapter says "amaran" on it, then it is not compatible with the MT Pro